Download Specification sheets of all products
Aluminium strip foil
Aluminium blister foil
Alu-alu blister foil
Multiply laminates
Rigid PVC films
PVDC coated PVC films
 
ALUMINIUM BLISTER FOIL:

Aluminium blister foil is good barrier to moisture, vapour and gases and is suitable for high speed packing applications on rotary and flat bed blister packing machines.

The blister packs are in compact in size and economical, as compared to strip packs. Tablets can be removed easily from blister packs, as the hard foil breaks quickly when tablet /capsule is pressed from PVC side. Barrier properties of blister packs are comparitvely lower than strip pack due to usage of PVC film on one side.

We offer both unprinted and printed blister foil as per customers requirements with different foil thickness and heat seal lacquer grammage.

We also offer both side printed blister (also printed on HSL side of the foil), blister foil with Holograms for unique authentication of your product.
Standard Specifications of
Aluminium Blister Lidding Foil (Foil/HSL):
Composition of Aluminium Foil:
Thickness of Aluminum Foil
                                   : in mm
                                   : in micron
Thickness Tolerance
                      ( +/-8%) : in mm
Al. Foil weight (gsm)
Pinholes in Al. (no/sqm) max.



0.020
20
+/- 0.0016
54 (+/-8%)
50



0.025
25
+/-0.002
67.5 (+/-8%)
35
Composition of Heat Seal Lacquer (HSL):
HSL : Grams per Square mtr (gsm)

4-6

4-6

For all Aluminium Foil Thickness:
Composition:
Aluminium Foil Alloy
Aluminium Foil  Finish
Temper (Soft / Hard)
HSL Coating  Surface
Sealing Strength
Sealing Surface
AA 1200 / AA 1235 / AA8011
Matt / Bright
Hard ( Full Hard )
Matt / Bright
450 grams / 15 mm.
Foil to PVC, PVC/PVDC,alu-alu.
Dimensions:
Reel Width      : Unprinted
                      : Printed
Width Tolerance
Core Material
Core Diameter
Reel Diameter / Reel OD:
Reel OD Tolerance
Type of Joint

Type of  Tape used for Joint

60 - 900 mm
60-720 mm
+/-0.5 mm
Aluminium / Plastic
76 mm
230-300 mm (standard)
+/- 5 mm
Single Butt / Double Butt / Lap Joint
Paper Tape/ Plastic Tape
(Red, Brown or Black colour)
Properties of Printed Side :
Colour
Ink Adhesion Test
Printing Surface
Repeat Length Tolerance
Registration Tolerance
Printing
Print Primer
Other

1-5
No ink lifting
Matt / Bright (non HSL side)
+/- 0.5 mm
+/-0.5 mm
As per design / artwork.
0.25 gsm max.
Abrasion, water and heat resistant
Recommended Operating Conditions:
Temperature ( deg. C)
Dwell Time


190 deg C
0.5 seconds (min.)
Notes :
1. Above mentioned specifications are standard specifications. We also offer tailor made specifications as per customers requirement i.e. different combinations of foil (thickness) and heat seal lacquer (gsm).
2. In case of Printed Designs, customer to specify unwinding direction and supply artwork/design of printed designs with colour scheme.
3. We also offer higher (6-8gsm) and lower (3-5gsm) grammage of Heat Seal Lacquer.
4. The lacquer used is food/pharma grade & is safe for contact with tablets /capsules.
5. Normal packing of the product is corrugated cartons / wooden case / Pallets etc. Customer to specify their packing requirements.
SGM INDIA
  Aluminium Blister Foil


Aluminium foil for blister packing is offered in 20/25/30 micron thick hard foil coated with Heat Seal lacquer (HSL) compatible with PVC/PVDC.
Coating thickness can be as per your requirement.
We also offers both side printed blister foil.
      
 
SGM INDIA : B1/401, Runwal Estate, Behind R-Mall, Ghodbunder Road, Thane (West). 400607, Maharashtra, India
Mobile: +91-98201 98305, Ph: +91-22-2589 0508, Fax: +91-22-2589 2483, E-mail: sgmindia@outlook.com
Copyrights © 2004 SGM India. Best Viewed in 800X600 Resolution
Disclaimer